Installation
January 2021
Refer to the Rosemount 3490 Series
can be drilled for fitting cable glands.
Related information
RS232 connections
3.4.2
Making electrical connections on panel-mount units
Field wiring connections are made to the back of the panel-mount control unit using the
two-part (plug/socket) terminal connectors provided.
Note
The plug/socket terminal connectors on the panel mount unit are polarized (keyed) to
prevent inter-changeability and incorrect connection.
Figure 3-6: Connection Terminals Layout (Mains-powered Panel-mount Unit)
The dc powered control unit has a slightly different layout – terminals 31 and 32 replace
terminals 28 and 29.
26
Quick Start Guide
for information about where holes
Figure 3-6
Reference Manual
00809-0100-4841
shows the rear panel.
Emerson.com/Rosemount