Emerson Rosemount 3490 Series Reference Manual page 22

Installation
January 2021
4. Remove the screw clamps from both of the screw clamp frames.
5. Slide the control unit into the panel, ensuring that the panel seal provided is in place
6. Re-fit the screw clamps, one on each side, and tighten with a screwdriver to clamp
Postrequisites
Make the electrical connections.
Related information
Installation guidelines for the panel mount version
Making electrical connections on panel-mount units
3.3.2 Mounting the IP-rated wall mount version
Procedure
1. Mount the unit on a suitable wall or structure using the fixing points.
2. Make the electrical connections.
Related information
Installation guidelines for the IP-rated wall mount version
22
Figure 3-4: The Fitted Screw Clamp
A. Screw clamp frame
B. Front panel bezel
C. Screw clamp with threaded spindle
behind the front panel bezel.
the control unit against the panel.
Reference Manual
00809-0100-4841
Emerson.com/Rosemount