Emerson Rosemount 3490 Series Reference Manual page 45

Reference Manual
00809-0100-4841
Editing a numerical parameter
To understand the basics about editing a parameter setting, follow the worked example
for editing a numerical parameter.
Procedure
1. Navigate to SETUP → OUTPUT → CURRENT OUTPUT → Up Range Value
2. To enter Edit Mode, press the red (enter) button.
3. Change the number from "+12.000" to "+6.500".
Emerson.com/Rosemount
parameter.
SETUP
APPLICATION
DISPLAY
OUTPUT
CURRENT OUTPUT
RELAY
TOTALIZER
When entering any parameter screen, it is in View Mode. Help with what can be
done next is on display line 4.
In View Mode, the Esc button is used to leave (quit) the parameter screen. The
SETTINGS menu then re-appears, as seen before selecting the parameter.
Up Range Val P401
12.000 m
Esc =Quit =Edit
A "+" appears to show this positive sign can be changed to be a negative sign. The
up arrow or down arrow cycles between "+" and "–". Also, note that on display
line 4, Edit has changed to be Save.
Up Range Val P401
12.000 m
+
Esc =Quit =Save
Parameter is in Edit Mode. In this mode, selecting Esc button restores the original
setting and returns to View Mode.
OUTPUT
CURRENT OUTPUT
Low Range Val
Up Range Val
Alarm Action
Up Range Val
Esc =Quit
Getting started
January 2021
P401
12.000 m
=Edit
45