Table of Contents
Advertisement
Reference Manual
00809-0100-4841
4.2.1
Enter the menu system
Follow these instructions for a quick tour of the menu system:
Procedure
1. This tour begins at the Full display or Large PV display
2. Press the red (enter) button to display the MAIN MENU
3. Press the red (enter) button to select the highlighted menu option SETUP.
4. Press the red (enter) button to select the highlighted menu option Controller:
5. Use the down arrow button to highlight OUTPUT and then select the red (enter)
6. Explore these menu options to see screens for setting-up for an application and for
7. After exploring, hold down the Esc button once to return to the MAIN MENU.
Related information
Additional features
Emerson.com/Rosemount
the menu system, use the Esc button repeatedly until the Full display re-appears.
Figure 4-4: Menu System Entry
1.572m
A
1
B
A. Large PV display
B. Full display showing PV in normal size characters and other information.
The SELECT INSTRUMENT menu now appears. This screen is for selecting whether to
enter the setup menu for the control unit (controller) or a found HART transmitter.
If there are no HART transmitters connected,
the control unit appearing straight away. Skip to
****.
The control unit SETUP menu now appears with menu options APPLICATION,
DISPLAY, and OUTPUT visible.
button to select and enter the OUTPUT menu.
The OUTPUT menu now appears with menu options CURRENT OUTPUT, RELAY,
TOTALIZER, PV DAMPING, ALARM, and FAULT.
displaying read-only information.
12:47
1.572m
MAIN MENU
1
SETUP
Run App?
MONITOR
Step 3
Step
Getting started
January 2021
(Figure
4-4). If already within
(Figure
4-4).
results in the SETUP menu for
5.
43
Hide quick links:
Advertisement
Table of Contents
