Table of Contents
Advertisement
Features
The standard machine includes the following features:
• Two section boom
• Boom rollers
• Sealed pivot pins for extended service periods
• Side mounted engine
• Lights
• 12 Volt electrical system
• Electronic display
• Easy access drop down electrical panel
• 12 Volt accessory power outlet
• Electric horn and backup alarm
• Rearview mirrors on each side of machine
• Adjustable seat with high-visibility orange seat belt
• Boom angle indicator
• Air filled tires
• Auxiliary hydraulic circuit with quick attach
• Multifunction boom control handle
Options
The following options may be provided on the machine:
• Enclosed cab with heat
• Enclosed cab with heat and A/C
• Heater/defroster/windshield wiper
• Work light package
• Rotating amber beacon with/without strobe
• Fenders
• Boom work lights
• Boom hook/shackle
• Tail and turn lights with/without strobe
Operation and Safety Manual
This Operation and Safety Manual provides the informa-
tion needed to safely operate the XR5919A Telehandler.
This manual shall be considered a permanent part of
the telehandler, and kept in the protective manual case
located behind the seat in the operator's cab.
Note
Before operating the telehandler, read this manual com-
pletely and carefully to understand the safety instructions
and the operation of controls and safety equipment. You
must comply with all DANGER, WARNING, and CAU-
TION notices. They are for your benefit.
Warning
Improper operation of this telehandler could result in
death or serious injury.
BEFORE starting the engine, do the following:
• Read the Operation and Safety Manual
• Read all the Safety Labels on the Telehandler
• Clear the area of all other persons
XR5919-A
Chapter 1 – Introduction
Learn and practice safe use of telehandler controls in a
safe, clear area, BEFORE you operate this telehandler
on a work site.
It is your responsibility to observe applicable laws and
regulations and to follow manufacturer's instructions on
telehandler operation and maintenance.
Replacement Manuals
Replacement manuals for the XR5919A can be obtained
by contacting our parts department by phone or visiting
our website:
Xtreme Manufacturing
8550 Eastgate Road
Henderson, NV 89015 USA
1-800-497-1704
http://www.xmfg.com
Model/Serial Plate
When contacting our parts department, please have the
telehandler serial number available. The serial number
plate is located in the operator's cab, at the base of the
seat.
For easy reference, you can record the serial number in
the space below:
Serial Number:________________________________
Orientation
Right side, left side, front, and rear are directional references
given from the operator's seat when facing forward.
Figure 1.1 – Serial Number Plate
1
Advertisement
Table of Contents
