Table of Contents
Advertisement
Left of Cab
Front of Chassis
Figure 4.6 – Rear View Mirrors
Controls and Indicators
Travel Select Lever
The travel select lever has three positions: FORWARD,
NEUTRAL, and REVERSE, which change the direction
of travel.
Travel Select Lever
Position
A fire extinguisher is mounted in the operator cab.
UP Position (away from the operator)
F (Forward)
N (Neutral)
CENTER Position
R (Reverse) DOWN Position (toward the operator)
The travel select lever automatically locks when it is in the
NEUTRAL position. The operator must raise and move
the travel select lever when changing to the FORWARD
or REVERSE position.
The travel select lever must be in the NEUTRAL position
to start the reach forklift. The back-up alarm automatically
sounds when the travel select lever is in the REVERSE
position.
XR5919-A
Purpose
Figure 4.7 – Travel Select Lever
Parking Brake Switch
The Parking Brake switch has two positions: ON and OFF.
Set Parking Brake switch to ON (DOWN) to engage the
parking brake and to OFF (UP) to disengage the parking
brake. The parking brake indicator illuminates when the
parking brake is set to ON (engaged).
The parking brake switch MUST BE in the ON position
(engaged) to start the engine.
Parking Brake
Indicator
Figure 4.8 – Parking Brake
The transmission shifter MUST BE in NEUTRAL position
to release the parking brake.
Figure 4.9 – Shifter Pop-Up Warning
Chapter 4 – Controls
Parking Brake
Switch
17
Advertisement
Table of Contents
