Table of Contents
Advertisement
Chapter 4 – Controls
tags, and have a qualified mechanic service or repair the
forklift BEFORE placing it into service again.
N. Digital Clock / Message Display
Displays warnings or status / information messages. If
there is no message or warning, it displays the digital
clock.
O. Transmission Shit Indicator
The transmission has two forward "F" and two reverse
"R" gears. It can operate in Automatic mode or Low
Range mode. When the transmission is in Neutral, the
Transmission Shift Indicator displays "N".
The subscript "A" or "L" indicates the Auto or Low trans-
mission range. The reach forklift starts up with the trans-
mission in AUTOMATIC mode. By pressing the Auto/Low
switch on the dash, the machine switches from Automatic
to Low Range, indicated by the "L" in the subscript.
Pressing the Auto/Low button again switches back to
Automatic range, indicated by subscript "A".
The "Low" mode is used for climbing steep grades, or
when ever slow speed is desired. The "Auto" mode adapts
to drive conditions and allows for higher speed travel.
P. Analog Tachometer Display
Indicates engine RPM on an analog/digital gauge.
Q. Digital Tachometer
The engine RPM is also displayed as a digital readout.
R. Hour Meter
Indicates and records engine operating hours. Use the
hour meter to establish a forklift maintenance schedule.
S. Menu Button Indicator
Use the soft button to the left of this indicator to access
the Main Menu screen.
Display Features
The display allows the operator to view vital engine
information and other critical functions, including gauge
display, engine diagnostics to monitor engine condition
and performance, fault codes, and warning lights.
Power Up
When the ignition is turned on, the display powers up and
defaults to GAUGE DISPLAY mode. The display should
remain in this mode for normal operation.
20
Select Buttons
Menu Button
Figure 4.15 – Power Up Screen
Main Menu
Pressing the MENU button will bring up the MAIN MENU.
Pressing the MENU button again brings up the SERVICE
REMINDER screen.
Figure 4.16 – Main Menu
Utilities
The Utilities Menu is accessed from the Main Menu by
pressing the top left selection button.
Figure 4.17 – Default Utilities Menu
Select Buttons
Enter Button
XR5919-A
Advertisement
Table of Contents
