Chapter 6 - Operation; Before Starting - Xtreme Manufacturing XR5919-A Operation And Safety Manual

Before Starting

Warning
Failure to use proper safety procedures when mount-
ing and dismounting the forklift could result in death
or serious injury.
• Keep steps clear of dirt, mud, snow, ice, debris, and
other hazards.
• Face the forklift for mounting or dismounting. Use
hand holds and steps to maintain three (3) points of
contact at all times, either both hands and one foot
or both feet and one hand.
• DO NOT use the controls, steering wheel, or foot
pedals as hand holds or steps. Avoid accidentally
engaging or disengaging a control.
Warning
DO NOT jump from the forklift. Clothing can get
caught on pedals, levers, or other protruding parts.
Landing on uneven surfaces could result in death or
serious personal injury.
Before starting:
1. Make sure the master battery disconnects are ON
(refer to Figure 6.1).
Battery Disconnect Switches
Figure 6.1 – Battery Disconnect Switches
2. Turn the Fuel Shut-off valve ON (refer to Figure 6.2).
XR5919-A
Chapter 6 – Operation
3. Use safe mounting/dismounting procedures to enter
the operator cab.
4. Adjust the operator seat for position and comfort.
(Refer to Seat Adjustment section in this manual).
5. Adjust mirrors (this may require assistance).
6. Fasten seat belt.
7. Set the travel select lever to NEUTRAL (N).
8. The Parking Brake MUST be engaged. Make sure
that the Parking Brake switch is ON (DOWN). The
parking brake indicator illuminates when the parking
brake is set to ON.
Parking Brake
Indicator
Parking Brake
Note
The engine will only start when the travel select lever is in NEU-
TRAL (N) and the Parking Brake switch is ON (engaged).
Figure 6.2 – Fuel Shut-off Valve
Switch
Figure 6.3 – Travel Select Lever
Fuel Shut-off Valve
49