Light Switches; Turn Signal And Hazard Switches - Optional; Steering Select Switch; Drive Mode Select Switch - Xtreme Manufacturing XR5919-A Operation And Safety Manual

Table of Contents

Advertisement

Chapter 4 – Controls

Light Switches

The Light Switches control the front lights and if equipped,
also the Boom and the rear lights.
Figure 4.10 – Light Switches
Carriage Fork Position and Sideshift
Switch – Optional
The optional Carriage Fork Position and Sideshift Switch
may be used to select between fork position (in and out)
and sideshift (right and left). Use AUX buttons 1 and 2
on the joystick to control the direction of movement of the
function selected.
Carriage Fork Position
and Side Shift Switch
Figure 4.11 – Turn Signal and Hazard
Light Switches

Steering Select Switch

Warning
DO NOT change steering modes until the forklift
comes to a complete stop. Align all four wheels
perpendicular to the axle, before changing steering
mode. Changing steering modes at higher travel
speeds can make the forklift unstable, and cause a
loss of control, which could result in death, serious
injury, or property damage.
The reach forklift includes three STANDARD modes
of steering: Crab Steering, Two Wheel (2W) and Four
Wheel (4W).
18
Light Switches
Figure 4.12 – Steering Select Switch
Use the Steering Mode Select switch located on the lower
right corner of the dash panel to change steering modes.

Drive Mode Select Switch

The transmission has two forward "F" and two reverse
"R" modes and it can operate in Automatic mode or Low
Range mode.
Use the Driving Mode Select switch to choose between
Automatic (switch in down position) and Low Range
(switch in up position).
For more info see Display Indicators paragraph O.
Drive Mode and
Wiper Switch
Figure 4.13 – Drive Mode and Wiper Switch
Wiper Switch – Optional
The Wiper Switch operates the windshield wiper on en-
closed cab models. The switch has three positions: Down
(OFF), Middle (ON), Up and hold (Wash).

Display Indicators

The display allows the operator to view vital engine
information and other critical functions, including gauge
display, engine diagnostics to monitor engine condition
and performance, fault codes, and warning indicators.
Steering Select
Switch
XR5919-A

Advertisement

Table of Contents
loading

Table of Contents