Table of Contents
Advertisement
XRM945
Introduction
General
This Operation and Safety Manual provides the
information needed to safely operate the XRM945 Reach
Forklift.
This manual should be considered a permanent part of
the forklift and kept in the plastic, protective case located
in the operator's cab.
Notice
BEFORE operating the forklift, read this manual
completely and carefully to understand the safety
instructions and the operation of controls and safety
equipment. You must comply with all DANGER,
WARNING, and CAUTION notices. They are for
your benefit.
Warning
Improper operation of this forklift can cause injury
or death.
BEFORE starting the engine, do the following:
• Read this Operation and Safety Manual.
• Read all safety decals on the forklift.
• Clear the area of other persons.
Learn and practice safe use of forklift controls in a
safe clear area, BEFORE you operate this forklift on a
worksite.
It is your responsibility to observe applicable laws and
regulations and to follow manufacturer's instructions
on forklift operation and maintenance.
Replacement manuals
Replacement manuals for the XRM945 Reach Forklifts
can be obtained by contacting:
Xtreme Manufacturing
Phone: (800) 497-1704
For information call (800) 497-1704
Model/Serial Number Plate
When contacting the manufacturer, please have the
forklift model and serial numbers available. The model/
serial number plate is located on the left side, inside the
operator's cab.
For easy reference record the model and serial numbers in
the space provided.
Model Number: __________________________________
Serial Number: ___________________________________
Figure 1-1. Model/Serial Number Plate.
Orientation
Right side, left side, front, and rear are directional
references given from the operator's seat while facing in a
forward direction.
Figure 1-2. Forklift Direction Orientation.
Introduction
Page 3
Advertisement
Table of Contents
