Table of Contents
Advertisement
Chapter 4 – Controls
The top left button restore the default settings. Each
Restore Defaults needs to be confirmed or canceled on
the next screen. Pressing the MENU button will return to
the previous menu.
Figure 4.24 – User Settings Pop-Up Warning
Active Faults
This option allows for viewing all active engine faults.
Scroll using the Up and Down arrows.
Hidden Utilities
The HIDDEN UTILITIES screen is accessed from the
MAIN MENU by pressing the lower left menu select
button and then on the next screen pressing the middle
upper select button twice and then the middle lower but-
ton twice. Pressing the MENU button will return to the
UTILITIES mode.
The HIDDEN UTILITIES menu has the following sub-
menus:
• System Setting
• Service Reminders
• PG Controls (button not shown in Hidden Utilities
screen)
• Back-Up Camera Setup
• Clear Faults
Note
This menu is not intended for regular end-users.
22
Figure 4.25 – Hidden Utilities
System Settings
This sub-menu is used by developers and is accessed
from the HIDDEN UTILITIES menu by pressing the
corresponding select button. Use the Up or Down select
buttons to navigate through this menu. The top left select
button restore the manufacturer default settings.
Figure 4.26 – System Settings
Service Reminder Settings
This menu is in the HIDDEN UTILITIES menu and it is
accessed by pressing the service reminders select button.
Figure 4.27 – Edit Service Reminders
XR5919-A
Advertisement
Table of Contents
