Table of Contents
Advertisement
Chapter 6 – Operation
Quick Attach Couplers
Figure 6.15 – Quick Attach Couplers
7. Remove the quick attach pin keeper.
Quick Attach Pin Keeper
Figure 6.16 – Quick Attach Pin Keeper
8. Remove the pin at the bottom of the adapter.
Figure 6.17 – Quick Attach Pin
9. Lower the attachment to the ground in a level position.
56
Pin
Figure 6.18 – Attachment On Ground
10. Tilt and lower boom until pivot pins (A) have discon-
nected from attachment hooks (B).
Attachment Hooks
Figure 6.19 – Attachment On Ground
11. Retract the boom to fully disconnect the attachment
from the quick attach adapter.
Load Handling
Danger
Death or serious injury by electrocution will result
from contact with or inadequate clearance with en-
ergized power lines or apparatus.
• Take extreme caution when operating the telehan-
dler in an area where active overhead power lines,
overhead or underground cables, or other power
sources exist.
• Contact the appropriate power or utility company to
de-energize power lines or take other suitable pre-
cautions.
Danger
Keep the telehandler, attachments, and loads a safe
distance from electrical power lines.
Pivot Pins
XR5919-A
Advertisement
Table of Contents
