Table of Contents
Advertisement
Xtreme Manufacturing Product Warranty Policy
FREIGHT DAMAGE
•
If a machine is received in a damaged condition, then the damage must be noted on the bill of lading and /or
delivery documents and photographs must be taken at the point of delivery, prior to signing acceptance of the
consignment .
•
The freight company and Xtreme Manufacturing must be contacted by the Distributor and a damage claim
registered by either party immediately.
•
The above requirements apply only to freight damage associated with equipment supplied by Xtreme Manufac-
turing transport. Customer freight issues are excluded from this warranty policy.
THIS PRODUCT WARRANTY POLICY SPECIFICALLY EXCLUDES:
1. Engines, motors, tires and batteries are manufactured by specialist suppliers to Xtreme Manufacturing, who
furnish their own warranty policies. Xtreme Manufacturing will, however, to the extent permitted pass through
any such warranty protection to the Distributor/SSC / Customer.
2. Xtreme Manufacturing products which has been modified or altered outside Xtreme Manufacturing facto-
ries without written approval, if such modification or alteration, in the sole judgment of Xtreme Manufacturing
Engineering and/or Service Departments, adversely affects the stability, reliability or service life of the Xtreme
Manufacturing product or any component thereof.
3. Any Xtreme Manufacturing product which has been subject to misuse and abuse, improper maintenance or
accident. "Misuse" includes but is not limited to operation beyond the factory-rated load capacity and speeds.
"Improper maintenance" includes but is not limited to failure to follow the recommendations contained in the
Xtreme Manufacturing Operation, Maintenance, and repair Parts Manuals.
4. Normal wear of any Xtreme Manufacturing component part(s). Normal wear of component parts may vary
with the type, application or type of environment in which the machine may be used; such as, but not limited to
sandblasting applications.
5. Routine maintenance, routine maintenance items and minor adjustments are not covered by this warranty,
including but not limited to hydraulic fluid, filters and lubrication, paint and decals engine tune-up, brake adjust-
ments etc. Xtreme Manufacturing will not cover leaks from fittings, hoses and any other connection points after
the unit has been in service for 90 days or 150 hours of operation which ever comes first.
6. Any Xtreme Manufacturing product that has come into direct contact with any chemical or abrasive material.
7. Incidental or consequential expenses, losses, or damages related to any part or equipment failure, including
but not limited to freight cost to transport the machine to a repair facility, downtime of the machine, lost time for
workers, lost orders, lost rental revenue, lost profits, expenses or increased cost. This warranty is expressly in
lieu of all other warranties, representations or liabilities of Xtreme Manufacturing, either expressed or implied,
unless otherwise amended in writing by Xtreme Manufacturing.
8. Xtreme Manufacturing warranty policy does not cover any duties, taxes, environmental fees including without
limitation, disposal or handling of tires, batteries and petrochemical items.
Xtreme Warranty Statement
Effective 1/1/2017
Advertisement
Table of Contents
