Introduction; General; Replacement Manuals; Model/Serial Plate - Xtreme Manufacturing XR1147 Operation And Safety Manual

Introduction

Introduction

General

This Operation and Safety Manual provides the information
needed to safely operate the XR1147 Telehandler.
This manual should be considered a permanent part of the
Telehandler, and kept in the protective manual case located in
the operator's cab.
Before operating the Telehandler, read this manual com-
pletely and carefully to understand the safety instructions
and the operation of controls and safety equipment. You
must comply with all DANGER, WARNING, and CAUTION
notices. They are for your benefit.
Improper operation of this Telehandler could result in
death or serious injury.
BEFORE starting the engine, do the following:
• Read the Operation and Safety Manual
• Read all the Safety Labels on the Telehandler
• Clear the area of all other persons
Learn and practice safe use of Telehandler controls in a
safe, clear area, BEFORE you operate this Telehandler on
a work site.
It is your responsibility to observe applicable laws and
regulations and to follow manufacturer's instructions on
Telehandler operation and maintenance.

Replacement Manuals

Replacement manuals for the XR1147 Telehandler can be ob-
tained by contacting our parts department by phone or visit-
ing our website:
Xtreme Manufacturing
Phone: (800) 497-1704
www.XMFG.com
Notice
Warning
Model / Serial Plate
When contacting our parts department, please have the
Telehandler serial number available. The serial number plate
is located in the operator's cab, at the base of the seat.
For easy reference, you can record the serial number in the
space below.
Serial Number:
Figure 1. Serial Number Plate

Orientation

Right side, left side, front, and rear are directional references
given from the operator's seat when facing forward.
Figure 2. Telehandler Direction Orientation
5
RIGHT
LEFT
Operation Manual