Light Switches; Turn Signal And Hazard Switches; Steering Select Switch; Wiper Switch - Xtreme Manufacturing XR5919 Operation And Safety Manual

Light Switches

The Light Switches control the boom and cab lights.
Fig 23. Light Switches

Turn Signal and Hazard Switches

The optional Turn Signal Switch controls the turn signals
(toggle left or right). The optional Hazard Light Switch flashes
all four (4) turn signals (toggle up or down).
Fig 24. Turn Signal and Hazard Light Switches

Steering Select Switch

DO NOT change steering modes until the forklift comes
to a complete stop. Align all four (4) wheels perpendicular
to the axle, before changing steering mode. Changing
steering modes at higher travel speeds can make the forklift
unstable, and cause a loss of control, which could result in
death, serious injury, or property damage.
Operation Manual
Warning
The Steering Select switch has three (3) steering positions:
Crab, Two Wheel Steering (2W), and Four Wheel Steering (4W).
Fig 25. Steering Select and 2-Wheel Rear Switches

Wiper Switch

The Wiper Switch operates the windshield wiper on enclosed
cab models. The switch has three (3) positions: Down - OFF,
Up - On, Hold Up - Wash.
Fig 26. Wiper Switch

Display Indicators

The display allows the operator to view vital engine
information and other critical functions, including gauge
display, engine diagnostics to monitor engine condition and
performance, fault codes, and warning indicators.
NOTE: There are two display styles currently used: Style A
as depicted in Fig 27 and Style B, depicted in Fig. 28.
A. FUEL GAUGE
The fuel gauge indicates the approximate quantity of fuel in
the tank. The total capacity of the fuel tank is 17 gallons (64
liters).
B. ENGINE TEMP GAUGE
The Engine Temp Gauge indicates the temperature of the
34
Operator Cab