Light Switches; Turn Signal Switch - Xtreme Manufacturing XR630 Operation And Safety Manual

Operator Cab
DAY/NIGHT MODE
This touch button allows for selecting the brightness of the
screen: brighter, appropriate for day operation or dimmer, for
operating the machine at night.
MACHINE OPERATION MANUAL
This touch button allows for viewing of all the available oper-
ation and instructional documentation related to the current
machine.
Fig 50. Instructional On-Screen Manuals
ON-SCREEN LOAD CHART
When the telehandler senses a load on the forks, the load
chart is automatically displayed on-screen. It can also be ac-
cessed by selecting the "Labels" option and then navigating
to the available load charts.
Fig 51. On-Screen Load Chart

Light Switches

The Light Switches control the boom and cab lights. It
located within the Steering Cluster in the Main Switch cluster
screen. This screen is accessed from the Settings screen,
touching the CAN Switches button.
See the Settings paragraph for mode details.
Fig 52. Light Switches

Turn Signal Switch

The Turn Signal Switch controls the turn signals (toggle the
left or the right switch).
Fig 53. Turn Signal Switches (Left and Right)
The optional Hazard Light Switch flashes all four (4) turn
signals (toggle the switch up or down). Both Turn Signal and
Hazard switches are located within the Steering Cluster in the
Main Switch cluster screen. This screen is accessed from the
Settings screen, touching the CAN Switches button.
See the Settings paragraph for mode details.
41
XR630
Operation Manual