Operator Cab
Controls and Indicators
Travel Select Lever
The travel select lever has three (3) positions:
FORWARD, NEUTRAL, and REVERSE, which change the
direction of travel.
Table 6. Travel Select Lever
Position
Purpose
F
Forward
UP Position (Away from the operator).
N
Neutral
CENTER Position.
R
Reverse
DOWN Position (Toward the operator).
Figure 6-17. Travel Select Lever.
The travel select lever automatically locks when it is in the
NEUTRAL position. The operator must raise and move
the travel select lever when changing to the FORWARD or
REVERSE position.
NOTE: The travel select lever must be in the
NEUTRAL position to start the reach forklift.
NOTE: The back-up alarm automatically sounds when the
travel select lever is in the REVERSE position.
Page 34
Gear Select Switch
The Gear Select switch has a twist grip handle with
four (4) positions: 1 – FIRST, 2 – SECOND, 3 – THIRD, and
4 – FOURTH.
NOTE: The reach forklift can be operated in four (4)
forward and four (4) reverse gears.
Figure 6-18. Gear Select Switch.
Parking Brake Switch
The Parking Brake switch (A) has two (2) positions: ON
and OFF.
Figure 6-19. Parking Brake.
(A) Parking Brake Switch Guard. (B) Parking Brake Indicator.
Set Parking Brake switch (A) to ON (DOWN) to engage the
parking brake and to OFF (UP) to disengage the parking
brake. The parking brake indicator (B) illuminates when
the parking brake is set to ON (engaged).
XRM945
Xtreme Manufacturing, LLC