Table of Contents
Advertisement
Operator Cab
1. Grasp the free end of the seat belt (located on the left side
of the seat) and make sure the belt webbing is not twisted or
entangled in any portion of the seat assembly.
2. Pull the retractable seat belt across your lap. Position the
seat belt as low on your body as possible.
3. Insert the latch plate into the buckle (on the right side of
the seat) until a "click" is heard.
4. Make sure seat belt retracts snugly across your lap.
Rear View Mirrors
Two (2) adjustable rear view mirrors are provided to aid the
operator's rear vision. One rear-view mirror is mounted on the
upper left of the operator's cab (A) and the other on the right
front of the chassis (B).
A
Fig 20. Cab-Mounted Left Mirror (A); Chassis-Mounted Right Mirror (B)
Controls and Indicators
Travel Select Lever
The travel select lever has three (3) positions: FORWARD,
NEUTRAL, and REVERSE, which change the direction of travel.
Travel Select Lever
Position
F (Forward)
UP Position (away from the operator)
N (Neutral)
CENTER Position
R (Reverse)
DOWN Position (toward the operator)
B
Purpose
Fig 21. Travel Select Lever
The travel select lever automatically locks when it is in the
NEUTRAL position. The operator must raise and move the
travel select lever when changing to the FORWARD or REVERSE
position.
NOTE: The travel select lever must be in the NEUTRAL position
to start the Telehandler.
NOTE: The back-up alarm automatically sounds when the
travel select lever is in the REVERSE position.
Parking Brake Switch
The Parking Brake switch (A) has two (2) positions: ON and
OFF.
B
Fig 22. Parking Brake
(A) Parking Brake Switch Guard (B) Parking Brake Indicator
Set Parking Brake switch (A) to ON (DOWN) to engage the
parking brake and to OFF (UP) to disengage the parking brake.
The parking brake indicator (B) illuminates when the parking
brake is set to ON (engaged).
33
XR630
A
Operation Manual
Advertisement
Table of Contents
