Johnson Controls YORK OPTIVIEW CONTROL CENTER Operation Manual page 4

General Access
There are a number of areas and features which may
be a hazard and potentially cause injury when operat-
ing the Control Center and chiller unless suitable safety
precautions are taken. Access to the Control Center and
chiller should be restricted to suitably qualified persons
who are familiar with the potential hazards and precau-
tions necessary for safe operation and maintenance of
equipment containing high temperatures, pressures and
voltages.
In complying with Johnson Controls' policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls QuickLIT website at
johnsoncontrols.com.
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
OptiView Control Center Retrofit Kit - Trane Installation Manual
OptiView Control Center Retrofit Kit - Trane Service Manual
OptiView Control Center Retrofit Kit - Trane Operation Manual
Wiring Diagram – Unit with Electromechanical Starter
Renewal Parts – OptiView Control Center Retrofit Kit
Solid State Starter MOD "B" – Operation/Service Manual
Variable Speed Drive – Operation Manual
Variable Speed Drive – Service Manual
4
CHANGEABILITY OF THIS DOCUMENT
http://cgproducts.
ASSOCIATED LITERATURE
MANUAL DESCRIPTION
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the equip-
ment.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
FORM 160.10-O1
ISSUE DATE: 4/27/2018
MANUAL NUMBER
160.10-N1
160.10-M1
160.10-O1
160.10-PW1
160.10-RP1
160.00-O2
160.00-O1
160.00-M1
JOHNSON CONTROLS