Johnson Controls YORK OPTIVIEW CONTROL CENTER Operation Manual page 136

APPENDIX B - PROGRAMMABLE SETPOINT VALUES
TABLE 13 - PROGRAMMABLE SETPOINT VALUES (CONT'D)
HARMONIC FILTER DETAILS SCREEN (HARMONIC FILTER SUBSCREEN)
SETPOINT
Local Motor Current Limit
Pulldown Demand Limit
Pulldown Demand Time
MOTOR TEMPERATURE SCREEN (MOTOR SUBSCREEN)
SETPOINT
Winding Sensor Mode
Winding Cutout
Bearing Sensor Mode
Bearing Cutout
Motor Cooling Pump
Motor Cooling Pump Mode
Phase A (Active Sensor)
Phase B (Active Sensor)
Phase C (Active Sensor)
Bearing (Active Sensor)
SETPOINTS SCREEN
SETPOINT
Local Leaving Chilled Liquid Temperature - Setpoint
Local Leaving Chilled Liquid Temperature - Range
LCHLT Cycling Offset - Shutdown
LCHLT Cycling Offset - Restart
Remote Analog Input Range
Motor Current Limit
Pulldown Demand Limit
Pulldown Demand Time
136
ACCESS MINIMUM
LEVEL VALUE
Operator 30 %
Operator 30 %
Operator 0 Min
ACCESS MINIMUM
LEVEL VALUE
None, Analog, Digital, Analog and
Service
Service 150 °F
None, Analog, Digital, Analog and
Service
Service 100 °F
Service Disabled
Service Automatic
Service None, A1, A2, A1 and A2
Service None, B1, B2, B1 and B2
Service None, C1, C2, C1 and C2
None, Sensor 1, Sensor 2,
Service
Sensor 1 and 2
ACCESS MINIMUM
LEVEL VALUE
38.0 °F - Water
Operator 36.0 °F - Sm Frz
10.0 °F - Brine
Operator 10.0 °F
Operator 1.0°F
Operator 0.0 °F
Operator 0 - 10 VDC
Operator 30 %
Operator 30 %
Operator 0 Min
FORM 160.10-O1
ISSUE DATE: 4/27/2018
MAXIMUM
DEFAULT
VALUE
100 %
100 %
255 Min
MAXIMUM
DEFAULT
VALUE
Digital
300 °F
Digital
180 °F
Enabled Disabled
Manual Automatic
MAXIMUM
DEFAULT
VALUE
70.0 °F
20.0 °F
4.0 °F or high-
est allowed
64.0 °F
value, which-
ever is lower.
70.0 °F
2 - 10 VDC 0 - 10 VDC
100 %
100 %
255 Min
JOHNSON CONTROLS
100 %
100 %
0 Min
None
265 °F
None
180 °F
None
None
None
None
45.0 °F
20.0 °F
0.0 °F
100 %
100 %
0 Min