Switch On And Login; Basic Settings; Setting The Language; Setting Date, Time And Time Zone - Inficon ELT3000 Translation Of The Original Operating Instructions

6 | Operation

6.1 Switch on and login

6.2 Basic settings

6.2.1 Setting the language

6.2.2 Setting date, time and time zone

36 / 74
► To turn on the unit, press the power switch for both the Gas Detection Unit and the
Gas Control Unit.
ð In the delivery state, the device displays the measurement screen after a
startup phase.
WARNING
Risk of injury from flammable solvents
The solvent in the calibration leak is highly flammable.
Overheating can damage the membrane, solvent can leak and ignite from an ignition
source.
► Observe the manufacturer's safety data sheets and follow the applicable work
instructions.
► Avoid heating the calibration leak to high temperatures.
You can set the language in the user settings, see Select, modify, create user profile
[} 37].
ü
Supervisor rights
1 > Date and time
2
Adjust.
3 Save .
ELT3000-Battery Leak-Detector-Operating-instructions-mina95en1-10-(2007)
INFICON