Unit Setting And Conversion Processing Time - Panasonic FP7 User Manual

Unit Settings and
Data Writing

4.2.2 Unit Setting and Conversion Processing Time

Conversion time varies with the configuration setting conditions.
Conversion processing execution/non-execution setting and conversion processing time
Select the execution or non-execution of the conversion processing of analog output on a
channel-by-channel basis. This can save the conversion time for channels that do not execute
conversion processing. A conversion time of 25 μs is required per channel.
Example) Conversion time for four channels
Converted in the order of ch0→ch1→ch2→ch3→ch0→ch1→ch2→ch3→.... (1 cycle = 100 μs)
Example) Conversion time for two channels (with CH2 and CH3 excluded).
Conversion is executed in the order of ch0→ch1→ch0→ch1→ch0→ch1→ch0→ch1→...
and the conversion time for CH2 and CH3, which are excluded, is saved. (1 cycle = 50 μs)
4-6