Sub; Setting Distribution Time Zones - Panasonic CZ-256ESMC1U Operating Instructions Manual

6 USING THE SYSTEM

6.8.6 Setting distribution time zones

You can set distribution time zones for the same day of each week.
Procedure
Select 6.Auxiliary settings in the main menu and 6.Distribution time zone in the sub menu.
*When "No Distrib." is selected, this screen is not accessible. (see
B
E
A
A Select the distribution group.
B Touch the "From" column.
C Set the start time of regular hours to a time between 12:00 AM and 12:00 AM (30-minute
intervals).
D Touch the Set button to confi rm the setting, or the Cancel button to cancel it.
• If you set the start time to 12:00 AM and the end time to 12:00 AM, the entire day is regular hours.
• If the start time is the same as the end time, the entire day is out of hours.
• If the start time and the end time are reversed, the outer side is regular hours.
E Touch the "To" column.
F Set the end time of regular hours to a time between 12:00 AM and 12:00 AM (30-minute
intervals).
G Touch the Set or Cancel button.
* Refer also to "6.6.3 Time zone totals and distribution".
CZ-256ESMC1U̲改.indb 62 CZ-256ESMC1U̲改.indb 62
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
1.Status/Control
6.Distribution time zone
2.Total data/Cut-off 7.Special distrib. day
3.Distrib. ratio/Usage
8.I/D unit settings
4.Maintenance/Test Run
9.Other settings
5.Initial settings 10.WEB settings
6.Auxiliary settings
11.User settings
5
5
Main
62
6 6
6 6
Main

Sub

1
1
)
Sub
C
F
2011/11/11 11:25:41 2011/11/11 11:25:41