Dentsply Sirona DAC Universal Operating Instructions Manual page 60

5 Operation
5.2 Using the menu and display information
60
The „Start/Stop"-Key has been pressed and the cycle will start when the
safety ring is pressed.
The cycle number is displayed on the right side of the symbol (here seen
as 2106).
If processing instruments on the Standard lid which must not be
lubricated, lubrication can be deactivated for the specific cycle by
pressing the "Right"-Key.
Indicates that lubrication has been deactivated for the next cycle.
The user shall confirm that this cycle is in fact being run without lubrication
by pressing the "Down"-Key.
If lubrication is deactivated, a warning symbol is displayed on the right
side of the display, indicating that lubrication is deactivated.
The following pictures illustrate a cycle for which lubrication has not been
deactivated.
The operation has been started and the lid is closing.
Indicates that the lid is securely closed to begin cycle.
Indicates internal cleaning of spray channels.
This is only performed with the Standard and Flex lids.
Sirona Dental A/S
Operating Instructions DAC Universal
66 15 574 D3472
D3472.201.20.01.02 03.2019