Display Information - Dentsply Sirona DAC Universal Operating Instructions Manual

Hide thumbs Also See for DAC Universal:
Table of Contents

Advertisement

Sirona Dental A/S
Operating Instructions DAC Universal
66 15 574 D3472
D3472.201.20.01.02 03.2019
5.2.1

Display information

The display will show the current system status. Below examples of these
status messages are shown. Please notice that these examples are from
running a standard program with the Standard lid. If another lid is chosen
the arrow indicating the lid type would point to the selected lid.
The display indicates the current status of the system as follows:
The DAC Universal has been switched on and is heating.
The machine is ready to run the standard program:
134°C, 3 minutes holding time.
The machine is ready to run the prion program: 134°C, 18 minutes
holding time.
Indicates that the Basket lid has been selected for the current program.
The user shall confirm that this cycle is in fact being run with this lid by
pressing the "Down"-Key.
If not, the cycle is aborted by pressing the "Up"-Key.
Indicates that the Flex lid has been selected for the current program.
The user shall confirm that this cycle is in fact being run with this lid by
pressing the "Down"-Key.
If not, the cycle is aborted by pressing the "Up"-Key.
5.2 Using the menu and display information
5 Operation
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents