Maintenance; Decommissioning; Change Of Location; Disposal And Scrapping - Bosch EFEP 60H Original Instructions Manual

5.

Maintenance

5.1 Maintenance
The filter insert in the oil tank must be replaced
regularly. After adding new test oil, the interior of the
EFEP 60H/67D must be rinsed by operating the lever.
When doing so spray into the extractor device without
the nozzle and holder assembly.
1
458759-3
Fig. 3: Replacing the filter insert
1 Hexagon bolt
2 Filter insert
5.2 Spare and wearing parts
Description
Oil tank (plastic)
Filter insert
<)
Shutoff valve with valve spindle for EFEP 60H
Shutoff valve with valve spindle for EFEP 67D
Wearing parts
<)
Robert Bosch GmbH
2
Order Number
1 685 400 014
1 687 431 011
1 687 415 047
1 687 415 048
Maintenance | EFEP 60H / EFEP 67D | 19
6.

Decommissioning

6.1

Change of location

¶
If the EFEP 60H / EFEP 67D is passed on, all the
documentation included in the scope of delivery must
be handed over together with the unit.
¶
The EFEP 60H / EFEP 67D is only ever to be
transported in the original or equivalent packaging.
6.2

Disposal and scrapping

6.2.1 EFEP 60H / EFEP 67D and accessories
¶
Dismantle the EFEP 60H / EFEP 67D and sort out
and dispose of the different materials in accordance
with the applicable regulations.
6.2.2 Substances hazardous to water
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
EFEP 60H / EFEP 67D, accessories
and packaging should be sorted for
environmental-friendly recycling.
¶
Do not dispose EFEP 60H / EFEP 67D into
household waste.
7. Technical data
7.1 Pressure gauge
For grade and diameter see overview on last but one
page.
7.2 Test oil tank
Description
Test oil tank filling quantity:
Filter in test oil tank with precision in
line with ISO 4020-2
7.3 Tightening torques
Description
Test pressure line for EFEP 60H/67D
Test pressure line to nozzle holder
Reduction fitting on nozzle holder
Adapter to nozzle holder
en
Value
600 ml
330 000 (approx. 15 µ)
Value
15 +10 Nm
15 +10 Nm
15 +10 Nm
15 +10 Nm
|
1 689 979 086 2018-06-08