Hardware Identification Label - Intrinsyc Open-Q 2100 User Manual

Development kit based on the snapdragon 2100 (apq8009w) processor

Table of Contents

Open-Q™ 2100 Development Kit based on the Snapdragon™ 2100 (APQ8009W) Processor User Guide Version 1.4

o 4.5" FWVGA (480x854) 16.7 M LCD (Optional Accessory)

The development kit comes with Android for Wearables 7.1.1 software pre-programmed on

the CPU board (SOM). Please contact Intrinsyc for availability of camera modules, sensor

boards, and other accessories:

3.5 Hardware Identification Label

Labels are present on the CPU board and the nano-ITX form-factor carrier board. The

following information is conveyed on these two boards:

CPU board (SOM):

• Serial Number

• WiFi MAC address

Refer to

http://support.intrinsyc.com/account/serialnumber

locating the serial number, as this will be needed to register the development kit. To

Note: Please retain the SOM and carrier board serial number for warranty purposes.

Figure 1 Open-Q 2100 Development Kit

sales@intrinsyc.com

http://support.intrinsyc.com/account/register

for more details about

Table of Contents

Do you have a question about the Open-Q 2100 and is the answer not in the manual?