Open-Q 2100 Development Kit; Introduction; Development Platform Notice; Anti-Static Handling Procedures - Intrinsyc Open-Q 2100 User Manual

Open-Q™ 2100 Development Kit based on the Snapdragon™ 2100 (APQ8009W) Processor User Guide Version 1.4

3. OPEN-Q 2100 DEVELOPMENT KIT

3.1 Introduction

The Open-Q 2100 Development Kit provides a reference platform for Qualcomm's latest 2100
series - Snapdragon 2100 processor. This kit is suited for Android / Linux application
developers, OEMs, consumer manufacturers, hardware component vendors, video
surveillance, robotics, camera vendors, and flash chip vendors to evaluate, optimize, test and
deploy applications that can utilize the Qualcomm® Snapdragon 2100 series technology.

3.2 Development Platform Notice

This development platform contains RF/digital hardware and software intended for
engineering development, engineering evaluation, or demonstration purposes only and is
meant for use in a controlled environment. This device is not being placed on the market,
leased or sold for use in a residential environment or for use by the general public as an end
user device.
This development platform is not intended to meet the requirements of a commercially
available consumer device including those requirements specified in the European Union
directives applicable for Radio devices being placed on the market, FCC equipment
authorization rules or other regulations pertaining to consumer devices being placed on the
market for use by the general public.
This development platform may only be used in a controlled user environment where
operators have obtained the necessary regulatory approvals for experimentation using a
radio device and have appropriate technical training. The device may not be used by
members of the general population or other individuals that have not been instructed on
methods for conducting controlled experiments and taking necessary precautions for
preventing harmful interference and minimizing RF exposure risks. Additional RF exposure
information can be found on the FCC website at

3.3 Anti-Static Handling Procedures

The Open-Q 2100 Development Kit has exposed electronics and chipsets. Proper anti-static
precautions should be employed when handling the kit, including but not limited to:
• Using a grounded anti-static mat
• Using a grounded wrist or foot strap.

3.4 Kit Contents

The Open-Q 2100 Development Kit includes the following:
o Open-Q 2100 SOM with the Snapdragon 2100 (APQ8009W) processor,
memory, power management, and WiFi/BT components
o nano-ITX form-factor carrier board
o AC power adapter and HDMI cable
http://www.fcc.gov/oet/rfsafety/
10
Copyright Intrinsyc Technologies Corporation