Evaluation Board Software Quick Start Procedures; Changes To Installing The Admv1013 Plugin Section; Admv1013 Usb Drivers - Analog Devices ADMV1013-EVALZ User Manual

UG-1461

EVALUATION BOARD SOFTWARE QUICK START PROCEDURES

INSTALLING THE ACE SOFTWARE,
PLUGINS, AND ADMV1013
Installing the ACE Software
The ADMV1013-EVALZ software uses the Analog Devices,
Inc., ACE software. Instructions on how to install and use the
ACE software are available on the
ACE software has already been installed, ensure that the software
is the latest version as shown on the
software installed is not the latest version, update the software
with the latest version.
To update previously installed
1. Uninstall the current version of
2. Delete the ACE folder in C:\ProgramData\Analog Devices.
3. Install the latest version of
installation, check the SDP Drivers, LRF Drivers and .NET
40 Client driver installations as well (see Figure 8).
Figure 8. Drivers Required with
Installing the USB Driver
After the ACE software is installed, take the following steps to
install the ADMV1013 USB driver, which allows proper usage of
the ADMV1013-EVALZ evaluation board:
1. Go to the Evaluation Kits section of the
product page on www.analog.com.
2. Click the ADMV1013 USB Driver link. The
USB driver downloads automatically.
3. In the folder where the
downloaded, right click the downloaded file and click
Extract All.
4. In the extracted folder, double click the
ADMV1013EvaluationBoardUSBDriver.Exe file to install
the ADMV1013 USB driver. An internet connection is
required for this installation.
ADMV1013
USB DRIVERS
ACE software page. If the
ACE software page. If the
ACE software with the latest version,
ACE software on the PC.
ACE software. During the
ACE
ADMV1013
ADMV1013
ADMV1013 USB driver is
Installing the
After installing the
take the following steps to install the
ACE software:
1. After installing the
Board.ADMV1013.acezip file from the
anywhere on the PC.
ACE 2. When the download is complete, double click the
Board.ADMV1013.acezip file to install the
plugin on the
3. Alternatively, in the main ACE window, click Plugins
Marketplace, and then click Available Packages. Search
for the Board.ADMV1013 plugin. Highlight the search
result and click Install Selected (see Figure 9).
Figure 9. Installing the
When the installations are complete and the
starts, the ADMV1013-EVALZ plugin appears (see Figure 10).
Figure 10. ADMV1013-EVALZ Plugin Window After Opening the
Rev. B | Page 6 of 19
ADMV1013-EVALZ
ADMV1013 Plugin
ACE software and ADMV1013
ADMV1013
ADMV1013 USB drivers, download the
ACE software.
ADMV1013 Plugin from
User Guide
USB driver,
plugin on the
ACE software page
ADMV1013
ACE Software
ACE software
ACE Software