Analog Devices ADZS-U4050LF-EZKIT User Manual

One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
ADZS-U4050LF-EZKIT for the

INTRODUCTION

This user guide describes the ADZS-U4050LF-EZKIT that is
used to evaluate the ADuCM4050
describes the different parts and components of the ADZS-
U4050LF-EZKIT evaluation board, as well as the functionalities
and configurations of the ADZS-U4050LF-EZKIT that enable
the user to develop applications with the device.

DOCUMENTS NEEDED

ADuCM4050 EZ-Kit® Manual
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
microcontroller. This guide

EVALUATION BOARD PHOTOGRAPH

Rev. 0 | Page 1 of 31
ADZS-U4050LF-EZKIT
ADuCM4050 Microcontroller

GENERAL DESCRIPTION

The ADuCM4050 is an ultra low power, integrated, mixed
signal microcontroller units (MCUs) used for processing,
control, and connectivity. The MCU system is based on an
ARM® Cortex-M4F processor, which is a 32-bit reduced
instruction set computer (RISC) processor and runs up to
52 MHz. The device has 512 kB of embedded flash memory
with error correction code (ECC) and 128 kB of system RAM
with parity.
The ADuCM4050 also features a collection of digital peripherals,
and an analog subsystem that provides clocking, reset, and power
management capabilities in addition to an analog-to-digital
converter (ADC) subsystem.
Refer to the ADuCM4050
For full details, see the
used in conjunction with this user guide when using the
evaluation board.
Figure 1.
User Guide
UG-1163
product page for future updates.
ADuCM4050 data sheet, which must be