Recommended Tools; Front Bezel; Removing The Optional Front Bezel - Dell EMC PowerEdge R340 Installation And Service Manual

3. Reconnect the peripherals and connect the system to the electrical outlet.
4. Power on the attached peripherals and then power on the system.

Recommended tools

You need the following tools to perform the removal and installation procedures:
• Key to the bezel lock
The key is required only if your system includes a bezel.
• Phillips #1 screwdriver
• Phillips #2 screwdriver
• Torx #T15 screwdriver
• Plastic scribe
• 1/4 inch flat blade screwdriver
• Wrist grounding strap connected to the ground
• ESD mat

Front bezel

Removing the optional front bezel

Prerequisites
1. Follow the safety guidelines listed in the
NOTE: The bezel key is part of the bezel package.
Steps
1. Unlock the bezel.
2. Press the release button, and remove the left end of the bezel.
3. Slide the tabs on the right end of the bezel out of the slots on the chassis and remove the bezel.
Figure 13. Removing the optional front bezel
Safety instructions.
PowerEdge R340 installing and removing system components 39