Operation; Hand Release (Option); Figure 14: Operation Of The Hand Release - KEB COMBISTOP 28 Installation Manual

OPErATION

7 Operation
The brake is switched via the voltage supply (=> connection). The max. number of
switching cycles

7.1 Hand release (option)

As an option, the brake can be deliver with a hand release In the event of malfunctions,
the brake can be actuated using the hand release.
cAUTION
Figure 14:
34
(=> „3.2 Device data COMBISTOP
Loss of braking efficiency due to actuating the hand release !
► Before actuating the hand release, mechanically secure the load
against unintended movements.
► If necessary, secure the elevator car against falling down.
Operation of the hand release
28") must not be exceeded.
► To release the brake, pull/press the le-
ver (1) of the manual release steadily
in the direction of the arrow (2).
► The lever does not engage. To en-
gage the brake, simply release the
lever.