PrODUcT DEScrIPTION
2.7 Options
2.7.1 Micro switch
A micro switch can be used to monitor the switching state of the armature (brake open/
closed). The user is responsible to connect the electrical equipment and to evaluate the
signals! The drive control must not allow the motor to start until the armature was attract-
ed by the magnet, i. e., the lining can rotate freely.
1
2
3
Figure 2:
For mor information on how to check and replace the micro switch, refer to section
„4.3 Mikroschalter
•
A micro switch can only be retrofitted if the brake is prepared for it. For
this reason, the variant must be ordered ex works.
•
Protection class IP65 is no longer given if the brake is equipped with a
micro switch!
Micro switch
Socket head screw
Disc
Brake with micro switch
(Option)".
4
Hexagon head screw
5
Hexagon nut
=>
17