Table of Contents
Advertisement
MOUNTING
4.2 Mounting the brake
ATTENTION
Step 1: Installing the hub
If no suitable friction surface is available.
► Install the optional flange (4) on the motor bearing assembly.
Install the hub (2) on the motor shaft, then
secure the hub on the motor shaft axially.
The hub and the linings must not be dam-
aged!
Make sure that the hub cannot run against
the second friction surface.
Taking into account the axial play of the
shaft, a distance of 0.5 mm to 1 mm is rec-
ommended.
25
Advertisement
Table of Contents
