Table of Contents
Advertisement
bASIc SAfETY INSTrUcTIONS
1 basic Safety Instructions
The following safety instructions have been created by the manufacturer for the area of
drive technology. They can be supplemented by local, country- or application-specific
safety instructions. This list is not exhaustive. Non-observance will lead to the loss of
any liability claims.
NOTICE
1.1 Target group
This manual is determined exclusively for technical staff. Technical staff for the purpose
of this manual must have the following qualifications:
•
•
•
•
•
1.2 Transport, storage and proper use
The transport is carried out by qualified persons in accordance with the environmental
conditions specified in this manual.
On arrival the brake needs to be checked for visible transport damages. Immediately
report transport damages to the transport company and the manufacturer.
Depending on its design and weight appropriate lifting devices must be use for handling.
In case of improper storage, no liability is assumed for resulting damages!
Don't storage devices or parts
•
•
•
•
10
Hazards and risks through ignorance.
► Read the instructions for use !
► Observe the safety and warning instructions !
► If anything is unclear, please contact KEB !
Knowledge and understanding of the safety instructions.
Skills for installation and assembly, start-up, operation and maintenance of the prod-
uct.
Understanding of the function in the used machine.
Detection of hazards and risks of the drive technology.
Knowledge about work safety and accident prevention (e.g.
in the environment of aggressive and/or conductive liquids or gases.
with direct sunlight.
outside the specified environmental conditions.
in environments that can lead to corrosion and contamination.
DGUV Vorschrift
3).
Advertisement
Table of Contents
