Table of Contents
Advertisement
bASIc SAfETY INSTrUcTIONS
1.5 Start-up and operation
The operation must not be started until it is determined that the installation complies with
the machine directive; Account is to be taken of
cAUTION
cAUTION
cAUTION
12
Pay attention to friction work (speed and the frequency of opera-
tion) !
Loss or drop of the braking torque !
► Exceeding the technical specifications may result in thermal over-
load at the braking surface or magnet. This may lead to failure of
the brake.
High temperatures due to braking.
burning of the skin!
► Cover hot surfaces safe-to-touch.
► If necessary, attach warning signs on the system.
► Check temperature and allow brake to cool down if necessary.
rotating Parts.
Shock or crushing of body parts !
► Wear protective goggles against ejected parts and dirt particles,
especially during first start-up.
► Take measures against being pulled into the machine.
EN
60204-1.
Advertisement
Table of Contents
