General Safety Guidelines; Electrical Safety Guidelines; Installation And Operation Safety Guidelines - KEB COMBISTOP Instruction Manual

Safety Instructions
Any use of the brake outside of this specified application is considered at the user's own
risk. Such unintended uses may pose unforeseeable risks or hazards. KEB America, Inc.
retains no liability for any damage or injury resulting from the use of a COMBISTOP
brake outside of the specified application.

2.3 General Safety Guidelines

Carefully observe the following safety guidelines before installation or operation of the
device.
Only trained personnel should operate the brake.
•
Immediately remove the brake from operation in case of a malfunction.
•
• Malfunctions should be corrected by trained personnel before returning the brake to
operation.
• Never use the brake in potentially explosive environments.
• The brake may not be modified or altered in any way not intended by KEB America, Inc.

2.4 Electrical Safety Guidelines

DANGER
• Observe all relevant safety standards during the electrical installation.
→
• Use only wire gauges and fuses rated for the power requirements of the device.
Ensure new or existing circuits meet NEC or applicable local requirements.
•
The device must be appropriately grounded by a connector from the magnet and the fixed
•
installation.
When using components without isolated inputs/outputs, equipotential bonding must be used
•
between the connected components to prevent damage to the device.
Do not exceed specified electrical voltage and currant limits.
•
→

2.5 Installation and Operation Safety Guidelines

WARNING
14
Rick of electrical shock!
 Turn off the power supply and secure it against switching on prior
to any work on the device.
 Wait until the system has come to a complete stop prior to any
work on the device.
 Never bridge branch circuit protection devices.
See the Standards for COMBISTOP type 38 Brakes section for details
specific to the product.
See Appendix 1: Technical Specifications for details.
Moving parts can crush and cut!
 Contact with rotating or moving parts may cause serious injury.
Ensure adequate protection around the brake to prevent
accidental contact!
2021 KEB America, Inc.
©