Table of Contents
Advertisement
MAINTENANcE AND SErvIcE
9.2.4 check the function hand release (option)
This section describes the subsequent check of the optional hand release on the brake.
Note!
The type of hand release attachment to the brake may vary depending on the ordered
design and size of the brake
Size
Adjustment dimen-
sion m / mm
ATTENTION
9.2.4.1 Checking the adjustment dimension 'm'
Note
The adjustment dimension 'm' must be adjusted with attracted armature! The adjustment
dimension applies to rated torque and operation with rated voltage.
Figure 17:
02
03
04
0,8
1,0
1,4
Loss of braking efficiency.
► For safe operation of the brake, it is absolutely necessary to check
the setting dimension 'm'.
► Improper adjustment and operation with overexcitation may result in
loss of braking efficiency.
Adjustment dimension m of the hand release
05
05
06
06
07
1,5
1,5
1,8
1,8
2,0
08
09
10
2,0
2,3
2,7
39
Advertisement
Table of Contents
