Replacing The Lining; Figure 16: Checking The Air Gap - KEB COMBISTOP 28 Installation Manual

MAINTENANcE AND SErvIcE
Figure 16:
Furthermore, the teeth of the lining and the hub must be checked. Worn parts must be
replaced.

9.2.3 replacing the lining

cAUTION
► Dismount the brake
► Remove the lining (3) from the hub (2).
► Place the lining straight on and slide it onto the hub.
► The lining must slide smoothly onto the hub! The teeth of the hub and the lining
► Check the air gap X with dial gauge
► The brake is mounted in reverse order of mounting
► Functional test and start-up
38
Checking the air gap
Loss of braking efficiency!
Securing the load!
► Prevent damage to the hub by all means.
► Be careful not to damage the lining by misaligned or tilted position-
ing.
► The lining must not come into contact with cleaning agents or sol-
vents.
► Contaminated linings must be replaced.
(=> 9.2.1 Dismount the brake)
must not be damaged!
(=> 9.2.2 Check air
(=> 4.2 Mounting the
(=> 6 Start-up).
gap).
brake).