Installation And Operation Safety Guidelines; Maintenance Safety Guidelines - KEB COMBINORM Instruction Manual

Safety Instructions

2.5 Installation and Operation Safety Guidelines

WARNING
CAUTION
Do not start the device until you have confirmed that the installation complies with the
following safety standards.

Ensure there is sufficient protection against foreign particles entering the air gap.
These particles may impede the motion of the armature.

Ensure there is sufficient thermal protection such that the brake does not exceed
or fall below the listed temperature limits for the device.
→

Ensure there is protection against accidental contact with rotating or moving
parts.

Ensure there is sufficient protection from environmental factors such as moisture
or aggressive gases that may compromise the integrity of the friction surface or
armature.

2.6 Maintenance Safety Guidelines

DANGER
WARNING
CAUTION
Carefully observe the following safety guidelines before performing maintenance on the
brake.
2021 KEB America, Inc.
©
Moving parts can crush and cut!
 Contact with rotating or moving parts may cause serious injury.
Ensure adequate protection around the brake to prevent
accidental contact!
Hot Surfaces!
 The heat generated during the operation of the brake may cause
burns on contact with skin. Always wear appropriate protective
equipment!
See Appendix B: Technical Specifications for details.
Risk of electrical shock!
 Turn off the power supply and secure it against switching on prior
to any maintenance on the brake.
Moving parts can crush and cut!
 Contact with rotation or moving parts may cause serious injury.
Wait until the drive has come to a complete stop before
performing any maintenance.
 Secure the drive against accidental movement prior to
performing any maintenance.
Hot Surfaces!
 The heat generated during the operation of the brake may cause
burns on contact with skin. Always wear appropriate protective
equipment.
15