Start-Up And Operation; Maintenance - KEB COMBIVERT G6 Instructions For Use Manual

2 | General Safety Instructions
2.2 Start-up and operation
WARNING
WARNING
2.3 Maintenance
DANGER
8
The start-up (i.e. the starting of normal operation) is prohibited until the machinery
has been proved to conform to the provisions
2014/30/EU; EN 60204-1
Wrong parameterization
Unintentional behaviour of the drive
ü During initial start-up or replacement of the drive controller
a) Secure motors against automatic restart.
b) Check whether the appropriate parameter list for the application has been im-
ported.
Software protection functions as sole protection.
Protection function in case of software problems without function.
ü Securing a unit solely with software-supported functions is not sufficient.
a) Install external protective measures (e.g. limit switch) that are independent of
the drive controller.
Unauthorized exchange, repair and modifications
Unpredictable malfunctions
a) The function of the drive controller is dependent on its parameterization. Never
replace without knowledge of the application.
b) Modification or repair is permitted only by KEB Automation KG authorized per-
sonnel.
c) Only use original manufacturer parts.
d) Infringement will annul the liability for resulting consequences.
Directive 2006/42/EG
must be observed.
KEB Automation KG
and Directive
ma_dr_g6-modbus-20332669_en