Mounting; Notes On Mounting; Checks Before Mounting The Brake - KEB COMBISTOP 38 Instructions For Use Manual

NOTES ON MOUNTING

4 Mounting

4.1 Notes on mounting

4.1.1 checks before mounting the brake

Before mounting the brake, check the following:
► Compliance of the ordered voltage and performance data with the type plate data.
► No damage to the brake or contamination by foreign particles in the area of opera-
► A suitable second friction surface must be provided. The type of counter friction
► The friction surfaces must be free from grease and oil.
► Air humidity, aggressive vapours/liquids or the like may lead to corrosion and cause
► The brake must first be de-energised when being mounted.
► Readjustment of the air gap is not possible! If necessary, check the air gap before
26
Unless otherwise stated, the numbers mentioned in this chapter refer to
=> „Figure 1: Overview COMBISTOP Type
tion or in the air gap of the brake.
surface affects the torque. Avoid sharp-edged interruptions in the friction surface. If
such a surface is not available, a flange or a friction disc (available as an accesso-
ry) can be used.
the lining to stick. In this case, the user needs to provide appropriate measures!
mounting =>„9.2.2 Check air
38".
gap".