Table of Contents
Advertisement
MOUNTING
4.2 Mount brake
4.2.1 Mounting the magnets for flange-mounted brake
Figure 9:
Mounting the magnets for flange-mounted brake
28
Outside centering
(e.g. 01...12-02-110/120/130/320-xxxx)
The magnet can be centered via the outside diam-
eter of the magnet and screwed to the mounting
surface with socket head screws (e.g. DIN 4762,
8.8).
Inside centering
(e.g. 01...12-02-110/120/130-xxxx)
The magnet can be centered via the inside diam-
eter of the magnet and screwed to the mounting
surface with socket head screws (e.g. DIN 4762,
8.8).During mounting, insert the circlip into the
magnet if the bearing is to be axially fixed.
Advertisement
Table of Contents
