Intended Use - Optimum OPTimill MH 35G Operating Manual

Warning: automatic start-
up!
Switching on forbidden!
Wear protective glasses!
Use ear protection!
1.3

Intended use

WARNING!
In the event of improper use, the milling machine
may be a hazard to personnel,

the machine and other property of the operating company and

the functionality of the milling machine may be compromised.

The milling machine is designed and manufactured to be used for milling and drilling cold met-
als or other non-flammable materials or materials that do not constitute a health hazard when
commercial milling and drilling tools are used.
The milling machine must only be installed and operated in a dry and well-ventilated areas.
If the milling machine is used in any way other than described above, or modified without the
approval of Maschinen Germany GmbH, then the milling machine is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH. It is
also part of the intended use that you
observe the limits of the milling machine,

observe the operating instructions,

and comply with the inspection and maintenance instructions.


Technical specification on page 19
EN
MH35G│MH35V
8
Warning: tilting danger!
Operating with rotary
current plug is not
permitted!
Wear protective gloves!
Only switch during
standstill!
Translation of original instruction
Warning: suspended loads!
Read the operating
instructions before
commissioning!
Wear safety shoes!
Protect the environment!
Caution: danger of
explosive substances!
Pull out the mains plug!
Wear a protective suit!
Contact address
Version 1.1.0 - 2020-08-07