Maintenance; Safety; Preparation; Restarting - Optimum OPTimill MH 35G Operating Manual

5

Maintenance

In this chapter you will find important information about
Inspection

Maintenance

Repair

of the milling machine.
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,

failure-free operation,

a long working life of the milling machine and

the quality of the products which you manufacture.

Installations and equipment from other manufacturers must also be in good order and condition.
5.1

Safety

WARNING!
The consequences of incorrect maintenance and repair work may include:
extremely serious injuries to those working on the milling machine and

damage to the milling machine.

Maintenance and repair work on the milling machine must be carried out by qualified
technical personnel only.
5.1.1

Preparation

WARNING!
Only work on the milling machine if it has been disconnected from the power supply.

Switching-off and securing the milling machine on page 17
Attach a warning sign.
5.1.2

Restarting

Before restarting, run a safety check.
WARNING!
Before starting the milling machine, it is essential that you ensure that this does not
constitute a risk to personal safety or damage to the milling machine.
Version 1.1.0 - 2020-08-07

Safety check on page 16
Translation of original instruction
MH35G│MH35V EN
41