4.12.1 Inserting; 4.12.2 Removing - Optimum OPTimill MH 35G Operating Manual

4.12.1 Inserting

The milling head is equipped with a collet chuck for
BT30x45° pull studs.

Screw pull studs into the conical seat.

Clean seat in the milling spindle.

Clean cone of the tool.

Mechanical securing of the quick clamping system
( 21 ) to be released.

Push up the spindle level and place the tool into the
spindle.

Release the spindle lever again.

Mechanical securing of the quick clamping system
( 21 ) to be locked.

4.12.2 Removing


Release mechanical securing of the quick
clamping system ( 21 ).

Firmly hold the tool.

Push up the spindle lever.
EN
MH35G│MH35V
38
21
Img.4-5: Unfitting
Translation of original instruction
43
23
45°
Img.4-4: Pull stud
Version 1.1.0 - 2020-08-07