Intended Use - Optimum OPTImill MB 4PV Operating Manual

Warning: automatic start-
up!
Activation forbidden!
Wear protective gloves!
Only switch at standstill!
1.3

Intended use

WARNING!
In the event of improper use, the drilling-milling machine

will endanger personnel,

the drilling-milling machine and other material property of the operating company
will be endangered,

the correct function of the drilling-milling machine may be affected.
The drilling-milling machine is designed and manufactured to be used for milling and drilling
cold metals or other non-flammable materials or materials that do not constitute a health hazard
by using commercial milling and drilling tools.
The drilling-milling machine must only be installed and operated in a dry and well-ventilated
place.
If the drilling-milling machine is used in any way other than described above, modified without
the approval of the company Optimum Maschinen Germany GmbH then the drilling-milling
machine is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in
accordance with the intended use.
We expressly point out that the guarantee or CE conformity will expire, if any constructive,
technical or procedural changes are not performed by the company Optimum Maschinen
Germany GmbH. It is also part of intended use that you
the limits of the drilling-milling machine are observed ,

the operating manual is observed,

the inspection and maintenance instructions are observed.


"Technical data" on page 77
Version 1.1.8 - 2021-7-29
Warning tilting danger!
Read the operating instruc-
tions before commission-
ing!
Wear protective boots!
Protect the environment!
Translation of original instructions
Warning: suspended loads!
Disconnect the mains plug!
Wear a protective suit!
Contact address
Caution, danger of explo-
sive substances!
Wear protective glasses!
Use ear protection!
MB4P ǀ MB4PV EN
67