Table of Contents
Advertisement
Interval
Where?
When necessary
EN
MH35G│MH35V
44
What?
How?
Turn the adjustment screw of the gib clockwise. The gib is
pushed further inward thus reducing the play in the guide
rail.
Check the settings. The corresponding guide rail must be
more easily movable but ensure stable guidance.
Readjusting
Z axis
Img.5-3:
Take-up screws Z axis
Increased play in the milling table spindles can be reduced by
resetting the spindle nuts. The spindle nuts are reset by reduc-
ing the thread flanks of the spindle nut by means of a take-up
screw. After the reset, it is necessary to check if there is still
smooth movement over the entire path, otherwise wear is con-
siderably increased due to friction between the spindle nut and
the spindle.
Reset
X axis
Img.5-4:
Milling table
Reset
Y axis
Img.5-5:
Milling table
Translation of original instruction
Upper adjustment crew
V-ledge
Adjustment screw
Adjustment screw
Version 1.1.0 - 2020-08-07
- Quick Links:
- Rating Plates
Hide quick links:
Advertisement
Table of Contents
