Tools And Tool Holding Fixtures - Optimum OPTimill MH 35G Operating Manual

other processes taking place in proximity and the period of time, during which the operator

is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations.
This information about the noise emission should, however, allow the operator of the machine
to more easily evaluate the hazards and risks.
CAUTION!
Depending on the overall noise exposure and the basic threshold values, machine
operators must wear appropriate hearing protection.
We generally recommend the use of noise and ear protection.
2.12

Tools and tool holding fixtures

CAUTION !
When using tools with larger diameters or at higher speeds!
The balancing of the tools has to amount to
0 - 6000 rpm - G 6.3

from a speed of 6000 rpm - G 2.5

according to DIN / ISO 1940.
EN
MH35G│MH35V
22 Translation of original instruction Version 1.1.0 - 2020-08-07