Repair; Customer Service Technician - Optimum OPTimill MH 35G Operating Manual

Interval Where?
When necessary
5.3

Repair

5.3.1

Customer service technician

For any repair work request the assistance of an authorised customer service technician. Con-
tact your specialist dealer if you do not have customer service's information or contact Stürmer
Maschinen GmbH in Germany who can provide you with a specialist dealer's contact informa-
tion. Optionally, the Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt
can provide a customer service technician, however, the request for a customer service techni-
cian can only be made via your specialist dealer.
If the repairs are carried out by qualified technical personnel, they must follow the indications
given in these operating instructions.
Optimum Maschinen Germany GmbH accepts no liability nor does it guarantee against damage
and operating malfunctions resulting from failure to observe these operating instructions.
For repairs, only use
faultless and suitable tools,

original parts or parts from series expressly authorised by Optimum Maschinen Germany

GmbH.
Version 1.1.0 - 2020-08-07
What? How?

Loosen one screw, turn the other adjustment screw of the
gib clockwise. The gib is pushed further inward thus reduc-
ing the play in the guide rail.

Check the settings. The corresponding guide rail must be
more easily movable but ensure stable guidance.
Reset
X axis
Y axis
Img.5-6: X axis / Y axis adjustment screws
Electrical
inspection
Translation of original instruction

Operator's obligations on page 13

Electrical system on page 18
V-ledge
Adjustment screw
MH35G│MH35V EN
45